TM 11-5815-602-10
EE161-DM-OPI-010/E154UGC74
TO 31W4-2UGC74-1
Changing the setting of the following switches with power on
affect terminal
operation.
BAUD RATE
q REC MODE
q XMIT MODE
q SELF TEST
q SIGNAL
NRZ/D10
CLOCK lNT/EXT/KG-30
q CLOCK
+/
(3) Changing the setting of the following switches with the power on
affect ter-
minal operation.
PARITY
STOP BITS
ASCII/BAUDOT MODE
q STATE
FIGURES S/J
(4) By the Operation Validation/State Determination condition message, the operator can
verify that the terminal will function in the operational state designated.
(5) The following is an example of an Operation Validation/State Determination condi-
tion message when the terminal is in the Baudot mode of operation.
BAUDOT
SYSTEM INITIALIZED
SWITCH STATE = ICT
OPERATIONAL STATE = ICT
OPERATING CAPACITY = FULL
MODE = BAUDOT
BAUD RATE = 75
STOP BITS = 1
END OF LINE OPTION = 0D 0D 0A
SPACE OPTION = ON
LINE LENGTH = 80
LINE FEEDS = 1
RECEIVE ENVELOPE OPTION = 56 5A 43 5A 43: 4E 4E 4E 4E
TRANSMIT ENVELOPE OPTION =56 5A 43 5A 43: 4E 4E 4E 4E 7F 7F 7F 7F 7F
7F 7F 7F 7F 7F 7F
BELL OPTION = FIGURES S
2-51
Previous Page
