TM 11-6625-596-12
Code
Explanation
P10-
Assigned to items which are NSA de- sign
Code
Explanation
controlled: special tools, test, measuring and
diagnostic equipment for COMSEC support,
handling and are issued on an exchange basis.
which are ac- countable under the provisions of
Such repair parts normally are repaired or
AR
380-41, and which are stocked and
overhauled at depot maintenance activities.
supplied by the Army COMSEC logistic system.
U-
Repair parts specifically selected for salvage by
M--
Repair parts which are not procured or stocked,
reclamation units because of precious metal
but are to be manufactured
in indicated
content, critical materials, or high dollar value
maintenance levels.
re- usable casings or castings.
b. Federal Stock Number, Column 2. This
G-
Major assemblies that are procured with PEMA
funds for initial issue only as exchange
column indicates the Federal stock number assigned to
assemblies at DSU and GSU level. These
the item and will be used for requisitioning purposes.
c. Description, Column 3.
assemblies will not be stocked above DS and
This column
GS level or returned to depot supply level.
indicates the Federal item name and any additional
description of the item required. A part number or other
(2) Maintenance code indicates the lowest
reference number is followed by the applicable five-digit
category of maintenance authorized to install the listed
Federal supply code for manufacturers in parentheses.
item. The maintenance level codes are-
d. Unit of Measure (U/M), Column 4. A two-
character alphabetic abbreviation indicating the amount
Code
Explanation
or quantity of the item upon which the allowances are
based; e.g., ft, ea, pr, etc.
C
Operator/crew
e. Quantity Incorporated in Unit, Column 5.
O
Organizational maintenance
This column indicates the quantity of the item used in
the TS-716/U.
(3) Recoverability code indicates whether
f.
Quantity Furnished With Equipment,
unserviceable items should be returned for recovery or
Column 6. This column indicates the quantity of an item
salvage.
Items not coded are expendable.
furnished with the equipment.
Recoverability codes are-
g. Illustration, Column 7. This column is
divided as follows:
Code
Explanation
(1) Figure number, Column 7a.
This
R-
Repair parts and assemblies that are
column indicates the figure number of the illustration in
economically repairable at DSU and
GSU
which the item is shown.
activities and are normally furnished by supply
on an exchange basis.
(2)
Item number or reference designation,
S-
Repair parts and assemblies which are
column 7b.
This column indicates the reference
economically repairable at DSU and
GSU
designation used to identify the item in the illustration.
activities and which normally are furnished by
supply on an ex- change basis. When items are
B-4.
Explanation of Columns in the Tabular List
deter- mined by a GSU to be uneconomically
of Maintenance and Operating Supplies-
repairable, they will be evacuated to a depot for
Section III
evaluation and analysis before final disposition.
T-
High dollar value recoverable repair parts which
Not applicable.
are subject to special
B-2