TM 11-5815-602-10
EE161-DM-OPI-010/E154UGC74
TO 31W4-2UGC74-1
G-10. PAPER SUBCOMMAND
This subcommand turns off the print drum and ribbon-feed motor, so that the paper and/or rib-
bon may be changed without a loss of messages in memory. No further inputs are printed until
the motor is restarted by executing the GO subcommand. All other keystrokes are ignored.
NOTE
PAPER subcommand is only valid in ICT state.
a. The LINE-FEED switch is activated to assist in loading the paper.
b. Incoming messages are lost if the memory becomes full while the printer is inactive.
c. If the paper runs out, the PAPER subcommand is activated and stops the print drum and
ribbon feed.
NOTE
Operator must initiate the GO command to restart the motor.
d. The keystroke sequence for the PAPER subcommand is "b0PAPERb0CR".
e. The shortest acceptable form of the subcommand is PAPER.
f. Operator example While in the PARAMETER command level, the operator wants to resup-
ply the terminal with paper.
Operator action
Inputs b0PAPERb0CR
System response
Print drum and ribbon feed stop.
Comment
Paper and/or ribbon may be changed. All keystrokes are ignored until GO CR is entered.
G-9
Previous Page
