SECTION I
INTRODUCTION
Code
Explanation
1-1. Scope
initial issues or outfittings. Not subject to
automatic replenishment.
This manual lists repair parts and special tools
Support equipment procured and stocked for
PE --
required for the performance of direct support,
initial issue or outfitting to specified main-
general support, and depot maintenance of the
tenance repair activities
TA-264/PT and TP-9. The PCCN for the TA-264/PT is
PF --
Support equipment which will not be stocked
GCAAW and the TP-9 is GCWAAX.
but which will be centrally procured on
1-2 General
demand.
Item procured and stocked to provide for
PG--
This repair parts and special tools list is divided into
sustained support for the life of the
the following sections:
equipment. It is applied to an item
a. Repair Parts List - Section II. A list of repair
peculiar to the equipment which because
parts authorized for the performance of mainte-
of probable discontinuance or shutdown of
nance at the direct support, general support, and
production facilities would prove un-
depot level. This repair parts list is arranged in
economical to reproduce at a later time.
alphabetical order.
KD --
An item of depot overhaulrepair kit and not
and Support
Test
b.
Special Tools,
purchased separately. Depot kit defined
Equipment - Section III. Not applicable.
as a kit that provides items required at the
c. Index - Federal Stock Number and Reference
time of overhaul or repair.
N u m b e r Cross-reference to Figure and Item
An item of a maintenance kit and not
KF --
Number - Section IV. A list, in ascending numerical
purchased separately. Maintenance kit
sequence, of all Federal stock numbers appearing in
defined as a kit that provides an item that
the listing followed by a list in alphanumeric
can be replaced at organizational or direct
sequence, of all reference numbers appearing in the
support or general support levels of
listings. Federal stock number and reference num-
maintenance.
bers are cross-referenced to each illustration figure
I t e m included in both a depot over-
KB --
and item number or reference designation appear-
haul/repair kit and a maintenance kit.
ance.
MO--
Item to be manufactured or fabricated at
1-3. Explanation of Columns
organizational level.
Item to be manufactured or fabricated at
MF --
The following provides an explanation of columns
direct support maintenance level.
found in the tabular list.
MH --
Item to be manufactured or fabricated at
a. Source, Maintenance, and Recoverability (Codes
general support maintenance level.
(SMR).
MD --
Item to be manufactured or fabricated at
(1) Source code. Indicates the manner of acquir-
depot maintenance level.
ing support items for maintenance, repair, or
AO --
Item to be assembled at organizational level.
overhaul of end items. Source codes are --
AF --
Item to be assembled at direct support
maintenance level.
Code
Explanation
AH --
Item to be assembled at general support
PA -- Item procured and stocked for anticipated or
maintenance level.
known usage.
AD --
Item to be assembled at depot maintenance
level.
PB -- Item procured and stocked for insurance
purposes because essentiality dictates
XA--
Item is not procured or stocked because the
that a minimum quantity be available in
requirements for the item will result in
the supply systems.
the replacement of the next higher as-
PC -- Item procured and stocked and which
sembly.
XB --
Item is not procured or stocked. If not
otherwise would be coded PA except that
it is deteriorative in nature.
available through salvage, requisition.
XC --
PD -- Support item, excluding support equipment,
Installation drawing, diagram instruction
procured for initial issue or outfitting and
sheet, field service drawing, that is iden-
tified by manufacturers' part number.
stocked only for subsequent or additional
2
Previous Page
