T M 11-6625-648-12
CHAPTER II
INSTALLATION
handling the equipment. Although the AN/
2-1. Service Upon Receipt of Equipment
PTM-7 is housed in a ruggedized case, the
a. Packaging Data. When packed for ship-
painted surfaces and other features may be
ment, the AN/PTM-7 is placed in a wooden
damaged by improper use of prying tools.
packing case padded with corrugated filler.
The wooden packing case and its contents are
(1) Remove the nails from the top of the
shown in figure 2-1. The dimensions of the
packing case with a nailpuller.
packing case are 12 inches high, 15 inches
(2) Remove the wooden cover.
deep, and 17 inches wide; the volume is .75
cubic feet, and the weight is 30.7 pounds.
(3) Remove the corrugated filler on top.
b. Removing Contents.
(4) Remove the envelope that contains
Caution: Be careful when unpacking and
the manual.
2-1
Previous Page
