TM 11-5805-384-30
2-16. HANDSET ELEMENT MAINTENANCE.
This task covers:
1. Removal
2. Testing
3. Installation
Personnel Required
INITIAL SETUP
One technician
Tools
Equipment Condition
Flat-tip screwdriver
Equipment on a workbench.
Multimeter AN/URM-105
Materials/Parts
Handset Elements
ACTION
LOCATION
ITEM
REMARKS
NOTE
Removal and replacement procedures are only for one element
since both are done in the same way.
REMOVAL
1.
Handset.
Element cover (1)
Unscrew to remove Set
aside.
2.
Element gasket (2)
Remove. Set
side.
3.
Handset cord.
Leads (3)
Using screwdriver, remove Test
element.
TESTING
Element
Contacts (4)
Check continuity.
Receiver should be 37 +10
ohms. Microphone should
be 37 10 ohms.
2-40
Previous Page
