TM 11-5805-357-24P
Recoverability
codes
Definition
F - Reparable item. When uneconomically reparable, condemn and dispose at the direct support level.
H - Reparable item. When uneconomically reparable, condemn and dispose at the general support level.
D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not
authorized below depot level.
c.
National Stock Number. Indicates the National stock number assigned to the item and will be used for
requisitioning purposes.
d.
Part Number. Indicates the primary number used by the manufacturer (individual, company, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
NOTE
When a stock numbered item is requisitioned, the repair part received may have a different part
number than the part being replaced.
e.
Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric code listed in SB 708-42
which is used to identify the manufacturer, distributor, or Government agency, etc.
f.
Description. Indicates the Federal item name and, if required, a minimum description to identify the item.
g.
Unit of Measure (UIM). Indicates the standard of the basic quantity of the listed item as used in performing
the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea, in,
pr, etc). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units
of measure will be requisitioned.
h.
Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration
figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in
lieu of a quantity indicates that no specific quantity is applicable, (e.g., shims, spacers, etc).
4.
Special Information
The following publications pertain to the AN/TCC-61 and its components:
TB 43-0124, Maintenance and Repair Procedures for S-141/G, S-144/G, S-250/G, S-280/G and S-318/G Type Shelters
TM 11-2300-369-15-1, Installation of Telephone Sets TA-312/PT and TA-1/PT With Reel Equipment CE-11 In Gun, AAA-
20-MM, XM167
TM 11-5410-213-14P, Shelters, Electrical Equipment, S-280A/G and S-280B/G
TM 11-5805-201-12, Telephone Set TA-312/PT
TM 11-5805-201-20P, Telephone Set TA-312/PT
TM 11-5805-201-34P, Telephone Set TA-312/PT
TM 11-5805-201-35, Telephone Set TA-312/PT
TM 11-5805-357-15, Terminal Set AN/TCC-61
TM 11-5805-367-12, Multiplexers TD-202/U, TD-203/U, TD-204/U, TD-352/U, and TD-353/U, Restorer, Pulse Form TD-
206/U, and Converter, Telephone Signal CV-1548/G and CV-1548A/G
TM 11-5805-367-20P-2, Multiplexer TD-204/U
TM 11-5805-367-20P-3-1, Multiplexer TD 352/U
TM 11-5805-367-20P-5, Converter, Telephone Signal CV-1548/G, CV-1548A/G, and 18 A4 Panel Assembly
TM 11-5805-367-34P-5, Converter, Telephone Signal CV-1548/G and CV-1548A/G
TM 11-5805-367-34-5, Converters, Telephone Signal CV-1548/G and CV-1548A/G
TM 11-5805-367-35/2, Multiplexer TD-204/U
TM 11-5805-367-35/3, Multiplexers TD-352/U and TD-353/U
TM 11-5805-383-12, Multiplexer TD-754/G
TM 11-5805-383-35, Multiplexer TD-754/G
TM 11-5810-232-12P, Communications Security Equipment TSEC/K-27
TM 11-5810-232-34P, Communication Security Equipment TSEC/KG-27
TM 11-5830-221-12, Intercommunication Stations LS-147A/FI, LS-147B/FI, LS-147C/FI and LS-147D/FI
TM 11-5830-221-24P, Intercommunication Stations LS-147A/FI, LS-147B/FI, LS-147C/FI and LS-147D/FI
TM 11-5830-221-35, Intercommunication Stations LS-147A/FI, LS-147B/FI, LS-147C/FI, LS-147D/FI
TM 11-6110-245-15, Voltage Regulator CN-514/GRC
5.
How to Locate Repair Parts
a.
When National stock number or part number is unknown.
(1) First. Using the table of contents, determine the functional group within which the item belongs. This
is necessary since illustrations are prepared for functional groups and listings are divided into the same groups.
(2) Second. Find the illustration covering the functional group to which the item belongs.
(3) Third. Identify the item on the illustration and note the illustration figure and item number of the item.
(4) Fourth. Using the Repair Parts Listing, find the figure and item number noted on the illustration.
b.
When National stock number or part number is known.
(1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National stock
number or part number. This index is in NUIN sequence followed by a list of part numbers in alphameric sequence,
cross-referenced to the illustration figure number and item number.
(2) Second. After finding the figure and item number, locate the figure and item number in the repair parts
list.
2
Previous Page
