Figure 3-7. Connections for order-wire operation if CX-4245/G is broken or connectors are damaged.
link known to be faulty. Making these con-
(4) To connect the TS-1323/PTM-7 to the
nections to an active link will disrupt service.
CX-4245/G at a junction point where there is no
d. Momentarily operate the ORDERWIRE switch
to SIG to signal the operators at the attended point.
the west attended point is connected to connectors 1
e. Operate the ORDERWIRE switch to TALK to
and 6. The CX-4245/G from the east attended point is
communicate with the operators at the attended sta-
connected to connectors 3 and 8.
These connections should be made only to a
Figure 3-8. Cable connections for order- wire circuit operation at quarter-mile junction points of cable CX-4245/G.