Sprocket drive feeds are installed in terminals
serial numbered 00081A through 03500A. The
sprockets will be deleted by the manufacturer
starting with serial number 03501A.
Guide the paper between the paper
pressure shoe and sprocket feed.
Continue to thread the paper through
the paper chute.
Extend it approximately 12 inches out-
side the case cover.
Raise the paper pressure shoe until it engages its wire retaining springs.
When closing the keyboard/Dustcover Assembly, make sure POWER
switch is OFF and toggle switch is held down.
Lift the keyboard and dustcover assembly up to the closed position.
Secure it in place with the latches.