TEST OR INSPECTION
Check to see if ribbon is improperly installed.
Correct ribbon installation (para 3-6). Notify organizational maintenance
if ribbon still does not feed.
6. Line-Feed does not advance paper.
Check to see if paper is properly installed.
Correct improperly installed paper (para 3-5). Notify organizational
maintenance if Line-Feed still does not advance paper.
7. Loss of all terminal functions.
Check to see if fuse(s) is defective.
Replace fuse(s) (para 3-11) with spare fuse(s) located below SELF-TEST switch.
Reapply power and allow terminal to operate 2 to 3 minutes to be sure malfunc-
tion does not reoccur. If terminal does not operate after changing fuses and ap-
plying power, remove fuse; replace with the old one and notify organizational
8. Dustcover ON/OFF switch does not function,
Check to see if toggle switch is connected to POWER switch linkage actuator arm.
With POWER switch in OFF position, hold toggle switch in down position when
With POWER switch ON, simply close Keyboard Dustcover Assembly.