TM 11-5805-384-30
2-10. REPLACEMENT OF HOOKSWITCH ASSEMBLY.
This task covers:
Replacement
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Electronic Equipment TK-100G
One technician
Materials/Parts
Equipment Condition
Hookswitch Assembly
Telephone shell assembly removed.
ACTION
REMARKS
LOCATION
ITEM
REPLACEMENT
CAUTION
Handle hookswitch assembly with care so that the spring pile up adjustment
will not be changed.
NOTE
Unsolder and connect wires one at a time to proper location on new
assembly.
1. Hookswitch
Wires (1)
assembly 1
2.
Hookswitch
Wires (1)
assembly 2
3.
Wires (1)
Repeat steps 1 and 2 until all wires are
connected.
4.
Telephone set
Hookswitch
Using cross-tip screwdriver, remove.
Set aside.
base
assembly 1
and two screws (2)
5.
Hookswitch
Using cross-tip screwdriver, install.
assembly 2
and two screws (2)
2-28