This manual lists spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE),
and other special support equipment required for performance of organizational maintenance of the TA-341B/TT. It
authorizes the requisitioning and issue of spares and repair parts as indicated by the source and maintenance codes.
This Repair Parts and Special Tools List is divided into the following sections:
a. Section II. Repair Parts List.
of spares and repair parts authorized for use
in the performance
maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are
composed of functional groups in numeric sequence, with the parts in each group listed in figure and item number
b. Section III. Special Tools List. Not applicable.
Number Index. A list, in National item identification number (NIIN) sequence, of all National stock numbers (NSN)
appearing in the listings, followed by a list, in alphameric sequence, of all part numbers appearing in the listings.
National stock numbers and part numbers are cross-referenced to each illustration figure and item number appearance.
3. Explanation of Columns
a. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number of the illustration on which the item is shown.
(2) Item number. The number used to identify item called out in the illustration.
b. Source, Maintenance, and Recoverability (SMR) Codes.
(1) Source code. Source codes indicate the manner of acquiring support items for maintenance, repair, or
overhaul of end items. Source codes are entered in the first and second positions of the Uniform SMR Code format as
PA - Item procured and stocked for anticipated or known usage.
XD - A support item that is not stocked. When required, item will be procured through normal supply channels.
Cannibalization or salvage may be used as a source of supply for any items source coded above except
those coded XA and aircraft support items as restricted by AR 700-42.
(2) Maintenance code. Maintenance codes are assigned to indicate the levels of maintenance authorized to USE
and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR
Code format as follows:
(a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to
remove, replace, and use the support item. The maintenance code entered in the third position will indicate one of the
following levels of maintenance:
O - Support item is removed, replaced, used at the organizational level.
(b) The maintenance code entered in the fourth position indicates whether the item is to be repaired and
identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized maintenance
functions). This position will contain one of the following maintenance codes:
D - The lowest maintenance level capable of complete repair of the support item is the depot level.
Z - Nonreparable. No repair is authorized.
(3) Recoverability code. Recoverability codes are assigned to support items to indicate the disposition action on
unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows:
Z - Nonreparable item. When unserviceable, condemn and dispose at the level indicated in position 3.
D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not
authorized below depot level.
c. National Stock Number. Indicates the National stock number assigned to the item and will be used for
d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation,